| Specifications: |
DC Models |
AC Models |
| Supply Voltage |
10-30 VDC |
24-240 VAC |
| Voltage Drop |
<2.0V @ 150mA |
<10V @ 200mA |
| Response Time |
1ms |
8ms (4ms for Retroreflective Models) |
| Output Configuration |
Bipolar: One current sourcing (PNP) and one current sinking (NPN) open-collector transistor |
SPST MOSFET solid-state relay with either N.O. or N.C. contact (light/dark operate selectable: 3-wire hook-up) |
| Reverse Polarity Protection |
Yes |
- |
| Short Circuit Protection |
Yes |
No |
| Overload Current Protection |
≥180mA |
≥220mA |
| Leakage Current |
≤1mA |
≤1.7mA |
| Max. Load Current |
150mA |
≤200mA |
| Min. Load Current |
25mA (≤1.7mA for AC Through-beam Emitter) |
| Transient Protection |
Yes |
| Construction |
Reinforced thermoplastic polyester housing, totally encapsulated o-ring sealing, acrylic lenses and stainless steel screws |
| Adjustments |
LIGHT/DARK OPERATE sensitivity adjustment switch |
| Indicators |
Red LED indicator on rear of sensor is on when the load is energized |
| Environmental Rating |
IP67 |
| Operating Temperature |
-20°C to +70°C (Max. relative humidity: 90% @ 50°C) |
| EMC |
IEC 60947-5-2, Parts 7.2.6.1.2.3 or RFI>3V/m (in 30-1000MHz), EFT>1KV, ESD>4KV (contact) |
| Voltage Withstandability |
IEC 60947-5-2, Part 8.3.3.4 or 500 VDC (or 1500 VAC) for 1 min.,
between all supply terminals connected together and enclosure |
| Insulation Resistance |
>20MΩ, with 500 VDC (or 1500 VAC) megger between all supply terminals connected together and enclosure. |
| Vibration Resistance |
IEC 60947-5-2, Part 7.4.2 or 10-55 Hz, 1.0mm amplitude in x, y, and z directions for 30 min. |
| Shock Resistance |
IEC 60947-5-2, Part 7.4.1 or 30g, 11ms in x, y, and z directions for six times each |
