| Specifications: |
Through-beam |
Retroreflective |
Diffuse |
| Angle of Divergence |
approx. 3.5° |
approx. 4.5° |
approx. 5.0° |
| Light Spot Size |
approx. 440mm @ 7m |
approx. 200mm @ 2.5m |
40mm @ 400mm |
| Response Time/Frequency |
<15 ms/33 Hz |
<0.7 ms/700 Hz |
<2 ms/250 Hz |
| Light Source |
LED red |
| Supply Voltage |
10...30 VDC (limit values) |
| Current Consumption (no load) |
≤35mA |
| Ripple (within Vs tolerance) |
±10% |
| Output Type |
PNP, NPN |
| Output Voltage High |
PNP: Vs - (≤1.5V); NPN is approx. Vs |
| Output Voltage Low |
PNP is approx. 0V; NPN is ≤1.5V |
| Output Current Max. |
100 mA |
| Operation Mode |
Light or Dark switching selectable via control wire |
| Housing |
Stainless Steel / Glass fiber reinforced plastic |
| Enclosure Rating |
IP67 / NEMA 6 |
| Circuit Protection |
Outputs short circuit and over current protected, Vs reverse polarity protected |
| Connection |
Cable or M8 4-pin plug |
| Ambient Operating Temp. |
-25...+55°C (-13...+131°F) |
| Storage Temperature |
-40...+70°C (-40...+158°F) |
| EMC |
IEC 60947-5-2, Parts 7.2.6.1.2.3 or RFI>3V/m (in 30-1000MHz), EFT>1KV,
ESD>4KV (contact) |
| Voltage Withstandability |
IEC 60947-5-2, Part 8.3.3.4 or 500 VDC for 1 min., between all supply terminals
connected together and enclosure |
| Insulation Resistance |
>20MΩ, with 500 VDC megger between all supply terminals connected together and enclosure. |
| Vibration Resistance |
IEC 60947-5-2, Part 7.4.2 or 10-55 Hz, 1.0mm amplitude in x, y, and z for 30 min. |
| Shock Resistance |
IEC 60947-5-2, Part 7.4.1 or 30g, 11ms in x, y, and z directions for six times each |
