| Specifications: |
DC Models |
AC Models |
| Supply Voltage |
10-40 VDC (Ripple<=10%) |
12-240 VDC / 24-240 VAC |
| Output Type |
NPN / PNP |
SPDT EM Relay or
Solid State Isolated N.O. |
| Response Time |
2ms |
SPDT EM Relay: 15ms
Solid State Isolated N.O.: 2ms |
| Max. Load Current |
250mA |
SPDT EM Relay: 10A at 120VAC,
5A at 240 VAC, 10A at 28 VAC,
Solid State Isolate N.O.: 300mA at 240VDC/AC |
| Max. Leakage Current |
<10 µA |
SPDT EM Relay: 0;
Solid State Isolate N.O.: 1mA at 240 VAC |
| Voltage Drop |
<2.5V |
- |
| No Load Current |
<30 mA |
| Operating Distance |
Standard Diffuse: 0.05...1.52m, Long Range Diffuse: 0.05...3.04m |
| Field of View |
Standard Diffuse: 3.5°, Long Range Diffuse: 6.5° |
| Indicator LEDs |
Green: Power, Yellow: Output, Red: Margin |
| Housing Material |
Glass fiber reinforced plastic |
| Lens Material |
Acrylic |
| Cover Gasket Material |
Neoprene |
| Enclosure Rating |
IP67 |
| Circuit Protection (DC Models) |
Emitter: Vs reverse polarity protected
Receiver: Outputs short circuit and over current protected, Vs reverse polarity protected |
| Time Options |
No Delay, On Delay, Off Delay, One-shot (for Models With Timing Delay) |
| Time Settings |
Adjustable, 0.1...15s (for Models with Timing Delay) |
| Ambient Operating Temp. |
-25°C to +55°C |
| Storage Temp. |
-40°C to +55°C |
| Relative Humidity |
5% to 95% RH |
| EMC |
IEC 60947-5-2, Parts 7.2.6.1.2.3 or RFI>3V/m (in 30-1000MHz), EFT>1KV, ESD>4KV (contact) |
| Voltage Withstandability |
IEC 60947-5-2, Part 8.3.3.4 or 500 VDC (or 1500 VAC) for 1 min.,
between all supply terminals connected together and enclosure |
| Insulation Resistance |
>20MΩ, with 500 VDC megger between all supply terminals connected together and enclosure. |
| Vibration Resistance |
IEC 60947-5-2, Part 7.4.2 or 10-55 Hz, 1.0mm amplitude in x, y, and z directions for 30 min. |
Shock Resistance
|
IEC 60947-5-2, Part 7.4.1 or 30g, 11ms in x, y, and z directions for six times each |
